Slim 1 inch spiked o-ring belt in 3mm vegetable tanned leather, welded nickel rings and conical spikes. Handmade in the UK. Lifetime guarantee.

This is The Uproar Belt. The strap is a single 1 inch wide strip of 3mm thick vegetable tanned leather. Welded nickel plated O-rings sit on triangle mounts riveted along the face of it, with conical spikes set into the leather between the rings.

The O-rings are welded closed, so they hold their shape and can't be pulled open. There's no stitching to wear through and no glued joints. The number of rings and spikes scales with the belt size, so the spacing stays even whatever size you order. It fastens with a nickel plated roller buckle.

It's the narrowest of our ring-belts: the same as The Ruckus Belt at 1 inch wide, and The Bedlam Belt with spikes in place of the twisted chain.

SIZING

Available in waist sizes 26" to 60", in 2" steps. Measure where you wear the belt, not your trouser size. If you need a size outside that range, send us a message and we'll sort it.

Width: 25mm (1 inch)

DISPATCH

Made to order. Your belt will be made and dispatched within 1-3 working days. Shipped from Leicestershire, UK.

CARE

Keep it away from prolonged water exposure. If the leather gets wet, let it dry naturally away from direct heat. Treat it occasionally with a leather conditioner to keep it supple, and wipe the hardware dry if it gets damp.

LIFETIME GUARANTEE

Every belt comes with our lifetime guarantee. If a rivet gives or the leather fails under normal wear, we'll repair or replace it. No time limit, no small print.

Got a question about sizing or anything else? Send us a message - we reply quickly.