Spiked black leather chain hip belt in 3mm vegetable tanned leather, with a row of nickel spikes and twisted chains in a double swag. Handmade in the UK.

This is The Rampage Belt. The strap is a single 1 inch (25mm) wide strip of 3mm thick vegetable tanned leather, worn low on the hips rather than at the natural waist.

The spikes are conical, 10mm across and nickel plated, set by hand in a single row each side of the centre O-ring. The number of spikes scales with the belt size so the spacing stays even whatever size you order. Three lengths of twisted nickel chain drape across the front: two 12 inch chains run from the O-ring out to a O-ring on each side, and a longer 24 inch chain swings lower between them. It fastens with a nickel plated roller buckle and a row of adjustment holes.

Prefer it without the spikes? We make it as The Tempest Belt - you'll find it in our shop.

SIZING

Available in sizes 32" to 48", in 2" steps. It sits on the hips, so measure around your hips where you intend to wear it, not your trouser size. The adjustment holes give some movement either side of your size, and if you need a size outside that range, send us a message and we'll sort it.

Width: 25mm (1 inch)

DISPATCH

Made to order. Your belt will be made and dispatched within 1-3 working days. Shipped from Leicestershire, UK.

CARE

Keep it away from prolonged water exposure. If the leather gets wet, let it dry naturally away from direct heat. Treat it occasionally with a leather conditioner to keep it supple, and wipe the spikes, chains, rings and buckle dry if they get damp to keep the nickel bright.

LIFETIME GUARANTEE

Every belt comes with our lifetime guarantee. If a spike comes loose, the leather fails, or a ring pulls out under normal wear, we'll repair or replace it. No time limit, no small print.

Got a question about sizing or anything else? Send us a message - we reply quickly.