Spiked leather leg harness in 3mm vegetable tanned leather. Clips to the belt you wear and buckles around the thigh. Handmade in Leicestershire.

This is The Onslaught Leg Harness. Two straps carry a single row of 10mm conical spikes and clip onto the belt you are already wearing with trigger snap hooks. They meet a welded nickel O-ring on the outside of the thigh, and from there an adjustable loop wraps the leg and fastens with a roller buckle.

Every spike, the O-ring mount, the buckle and the snap hooks are set and riveted by hand. No stitching to wear through, no glued joints. The 2 inch O-ring is welded closed so it cannot be pulled open. All hardware is nickel plated.

SIZING

Sized to the thigh from 16 to 32 inches, in 1 inch steps. Measure around your thigh where the loop will sit, not your trouser size. The roller buckle and punched tail give a little adjustment either side of your size. If you need a size outside this range, send us a message and we will sort it.

Strap and thigh loop width: 25mm (1 inch).

A belt is not included -- the harness clips onto a belt you already wear.

DISPATCH

Made to order. Your harness will be made and dispatched within 1-3 working days. Shipped from Leicestershire, UK.

CARE

Keep away from prolonged water exposure. If the leather gets wet, let it dry naturally away from direct heat. Treat occasionally with a leather conditioner to keep it supple, and wipe the nickel hardware dry if it gets damp.

LIFETIME GUARANTEE

Every harness comes with our lifetime guarantee. If a spike comes loose or the leather fails under normal use, we will repair or replace it. No time limit, no small print.

Want the same harness with bigger spikes? Take a look at The Savage Leg Harness, which carries larger 12mm spikes.

Got a question about sizing or how it clips on? Send us a message -- we reply quickly.
</content>