O-ring chain belt in 3mm vegetable tanned leather, welded nickel rings and twisted chain riveted ring to ring. Handmade in Leicestershire. Lifetime guarantee.

This is The Mayhem Belt. The strap is a single 1 1/2 inch wide strip of 3mm thick vegetable tanned leather. Welded nickel plated O-rings sit on triangle mounts riveted along the face of it, with twisted nickel chain riveted to the strap between the rings and swagged from ring to ring.

The O-rings are welded closed, so they hold their shape and can't be pulled open. There's no stitching to wear through and no glued joints. The number of rings and chain runs scales with the belt size, so the spacing stays even whatever size you order. It fastens with a nickel plated roller buckle.

Want the same belt with spikes in place of the chain, look at The Ruckus Belt. For the same belt on a narrower 1 inch strap, see The Bedlam Belt.

SIZING

Available in waist sizes 26" to 60", in 2" steps. Measure where you wear the belt, not your trouser size. If you need a size outside that range, send us a message and we'll sort it.

Width: 38mm (1 1/2 inches)

DISPATCH

Made to order. Your belt will be made and dispatched within 1-3 working days. Shipped from Leicestershire, UK.

CARE

Keep it away from prolonged water exposure. If the leather gets wet, let it dry naturally away from direct heat. Treat it occasionally with a leather conditioner to keep it supple, and wipe the hardware dry if it gets damp.

LIFETIME GUARANTEE

Every belt comes with our lifetime guarantee. If a rivet gives or the leather fails under normal wear, we'll repair or replace it. No time limit, no small print.

Got a question about sizing or anything else? Send us a message - we reply quickly.