Wide o-ring belt in 3mm vegetable tanned leather, three welded nickel rings on a 3 inch strap tapering to the buckle. Handmade in the UK. Lifetime guarantee.

This is The Carnage Belt. The strap is a single strip of 3mm thick vegetable tanned leather, 3 inches wide across the body and tapering to a 1 1/2 inch buckle end. It carries three welded nickel plated O-rings: one at each side in a folded leather tab, and one hung at the centre front from a riveted mount so it sits and swings against the body.

The O-rings are welded closed, so they hold their shape and can't be pulled open. There's no stitching to wear through and no glued joints. It fastens with a nickel plated single-prong roller buckle and a double-rivet keeper. It's worn as a wide waist cinch over a skirt or dress, not as a trouser belt.

It's the widest of our ring-belts. For a narrower strap version, look at The Mayhem Belt or The Ruckus Belt.

SIZING

Available in waist sizes 26" to 60", in 2" steps. Measure where you wear the belt, not your trouser size. If you need a size outside that range, send us a message and we'll sort it.

Width: 76mm (3 inches), tapering to 38mm (1 1/2 inches) at the buckle

DISPATCH

Made to order. Your belt will be made and dispatched within 1-3 working days. Shipped from Leicestershire, UK.

CARE

Keep it away from prolonged water exposure. If the leather gets wet, let it dry naturally away from direct heat. Treat it occasionally with a leather conditioner to keep it supple, and wipe the hardware dry if it gets damp.

LIFETIME GUARANTEE

Every belt comes with our lifetime guarantee. If a rivet gives or the leather fails under normal wear, we'll repair or replace it. No time limit, no small print.

Got a question about sizing or anything else? Send us a message - we reply quickly.